The Model 811 Battery Pack Rapid Charger

Features:

In the past, recharging batteries could be a slow process. With the new Model 811 Battery Pack Rapid Charger, batteries can now be re-charged in only a fraction of the time it previously took. Recharging a completely drained battery now takes just four to five hours and gives health care providers the ability to meet their peak usage needs. 

The Model 811 Battery Pack Rapid Charger is intended for use with Impact’s sealed lead acid battery packs P/N 704-0754-01 and P/N 704-0750-03. These battery packs are used in the Uni-Vent Eagle Model 754/754M and Uni-Vent Model 750/750M Portable Ventilators and the ultra-lite Model 326/326M Portable Aspirator.

The Model 811 features auto-sensing of line voltage and frequency, and is able to recharge battery-packs typically in 4-hours or less (depending on its state of discharge). An LED indicator signals whether the battery pack is in the Rapid, Float or Trickle Charge phase.

Battery packs plug directly into the Rapid Charger and a polarized input connector guards against inadvertent polarity reversal.

Specifications:

Input Voltage Range:	100 – 240 VAC
Input Frequency Range:	50/60 Hz
Controls:	Reset Pushbutton Switch
Indicators:	Charge Status LED
Battery Connector:	Polarized, 2-conductor
Battery Compatibility:	Sealed Lead Acid, 12V 5Ah (or higher capacity)